How To Keep Pull On Work Boots From Slipping – 7 Secret Tips

If you buy through our affilate links on our website, so we may earn some commision at no extra cost from you. Thank you so much if you use our links!

Last Updated on April 5, 2022 by Fred

What is Heel Slipping on work boots? – Heel going to slip is indeed an unpleasant condition in which the feet slip from your shoes even as strolling. And, in some instances, completely pop out, having left your boots behind. Heel slipping is the occurrence when your boot heels dig into your feet, becoming uncomfortable. Slipping in good pull-on work boots for men can be described as when the boot slips out of the foot.

Furthermore, it typically occurs when the footwear has not been broken in or is too big for you. It can also happen if the footwear does not have a good fit around the foot’s arch, creating gaps. The problem of heel slipping can be due to various reasons like wearing ill-fitting shoes, buying worn-out boots, or the bone structure of the feet.

Slip-on fit less snug than lace-ups. If your feet tend to be a bit wider, you might get away with a pair of work shoes, but for the most part, if you have wider feet, you want to opt for a pair of pull-on boots. Slippage is a common problem. This article will examine how to keep pull on work boots from slipping and how to stop it from happening.

How To Keep Pull On Work Boots From Slipping

Necessary Tips – How To Keep Pull On Work Boots From Slipping

Here are several necessary tips that you should apply if your pull-on work boots are slippery. Moreover, these steps will help you to easily break in pull on work boots as well.

1. Think of Tongue Pad to Support Your Heel

A tongue pad was invented as an extra layer of support for the instep area of a shoe or boot. However, it is not just a simple flat piece of rubber that you stick to the instep. By going over the instep and protruding a little at the backside. Furthermore, it provides two essential functions – lifting the instep and keeping the Heel in its place.

The tongue pad is a must-have item if you suffer from slipping heels. It will solve your problem and will not add or take away from any of the qualities of the boot itself. They are very soft and comfortable pads that make your boots fit like a glove. Simple insert them under the tongue and enjoy them on your next trip outdoors.

2. Choose Right Socks Will Prevent Slipping

Right socks guarantee your new work boots won’t slide off! The ultimate answer is to invest in a great pair of socks with a rugged bottom and high fiber content. Socks made from synthetic fibers will most likely slip off the feet of the wearer. Natural fibers such as cotton, hemp, silk, and bamboo contain a natural wax finish that helps them to stay in place on the feet.

If the pull-on boots you are wearing keep slipping off your feet, it is best to wear socks with rubber bottoms. These are the same type of socks that people wear on slippery floors. The rubber bottoms help them to grip onto surfaces since they are easily moved around on foot. It is recommended that getting a new pair of socks every time you get new boots.

3. When Searching For Socks To Wear With Your Work Boots, Start With The Ones That Are:

  • Polyester –is a synthetic material that does not absorb water. Instead, the heat from your foot drives the moisture away. Polyester socks retain their cushioning much better than cotton socks after a long day.
  • Wool – The best is wool and wool blends. Wool socks are naturally antimicrobial and keep your feet dry and comfy.
  • Not cotton –Wet cotton socks lose their padding ability and are unpleasant to wear in both summers and winters. They’re relatively inexpensive, but that’s about all they have going for them. Furthermore, the moisture hold by cotton makes your boots slippery.

4. You Can Place Lightweight Heel Liners

The lightweight heel liners are placed on the adhered side surface, and they prevent your heels from getting displaced due to constant rubbing. The Big-E Flexible Heel Liners are easy to apply. Take the protector, place it on the inside wall of the boot where your Heel will be resting.

Use these soft, 3M adhesive-lined heel pads to keep blisters at bay so you can stay focused on getting the job done. Heel liners are essential parts of the work boots that every user prefers to use before wearing them.

Heel liners are used for keeping work boots comfortable and the shoe well-liked by their wearers. These liners are being sold by manufacturers of all kinds of insoles for supporting feet. You can change the insoles if it is already damaged, but you still need to take care of this problem right away before it turns worse. Consider pulling on work boots with heel liners.

5. Insole Replacement of Boots

Replacing the insole can come in handy for people who are wearing boots with an unfiltered heel seat. To prevent the Heel from sliding out of your boots, you need to purchase insoles. That is designed explicitly for pull on work boots. You can now buy these insoles online or at most stores that supply work boots.

Invest in quality insoles if you want to keep your work boots from slipping. The rubber heels on some boots can wear out fast, causing them to be loose. If the Heel of your boot is worn out, purchase replacement insoles that will fit inside the boot’s heel pocket. Search for models with cushioned, contoured designs that will fit snugly inside the boots. Some brands even sell universal insoles created for any pair of work boots or work shoes.

6. Use of Hair Spray on Feet Can Help

Protect feet from injury by spraying hair spray on the socks before slipping them into the work boots. Even though this tip has been around for quite a while, it is still as good as ever. Hair spray leaves a thin film behind after it dries that will make your feet stick to the work boots. It’s like having little suction cups attached to your feet.

The secret to keeping pull on boots from slipping is hair spray. Hair sprays that people use to hold their hair in place will also work to keep your boots where they belong, on your feet. Always keep a can of hairspray handy, so you can spray your work boots before putting them on. It will help to keep them from slipping off of your feet.

7. If Nothing Works, Then Change Your Walking Style

Changing your walking style ensures you won’t slip when wearing our work boots. Learn how your heels should feel when you walk and practice using them consistently. This simple tweak is easy to learn and can help with boot slippage and falling incidents. Learn how to walk correctly on heels. You must place more weight on your toes, not on your heels.

First, the Heel must touch the floor while walking. Yes – simple as that. This is a tough habit to learn. But once know, you will never walk improperly. Thus, changing your walking style can solve your problem of slipping heels. That’s because a more upright walk, with a smaller toe-to-ball distance, creates a tighter fit inside the boot while keeping the heel snug.

Where Can I Find The Most Comfortable Non-Slippery Work Boot Brands?

There is one factor that has the most significant impact on the comfort of your work boots. An outsole that is well-cushioned. While shopping for boots, look for ones with cushioned outsoles, such as these:

  • Timberland – They have a hiker-style shoe with waterproof characteristics available.
  • Keen – For strength and stability, this able-to-run shoe-inspired boot has a lighter-weight EVA sole as well as a rubber outsole. These are perfect pull on boots for wide feet.
  • Irish setter – Work boots with an aluminum toe, heat-resistant rubber outsole, and vintage styling.
  • Wolverine –Water-resistant and insulated boot with polyurethane outsoles. It can use as a highlands hunting boot.

Final Words

Although heel slipping is an annoyance, it is difficult to avoid.  Check that your feet and boots are dry. Purchase the pair only from a quality brand. Several preventive measures can be taken to prevent it. Although it necessitates some work, it is well worth the effort. You can’t put your health at risk by standing on a slick surface all the time. Experts Recommended for comfort during work OSHA-approved slip-on boots.

How to keep pull on work boots from slipping is now not tough after applying these tips. The constant friction caused by slippage also may result in severe blisters and wounds. Furthermore, workplaces have always been littered with tools and equipment, so you can’t wear slick shoes. If your boots fall off, you’ll be fine. The key is to be relaxing on your feet.

Leave a Comment