How To keep Heel From Moving In Pull On Boots – Easy Ways

If you buy through our affilate links on our website, so we may earn some commision at no extra cost from you. Thank you so much if you use our links!

Last Updated on April 8, 2022 by Fred

Pull on boots –those shoes that you can put on and off without untying –are great to wear for things like sports and exercise because you don’t have to worry about tying laces. However, the problem with pull-on boots is that your feet can slip inside if your shoes don’t fit properly. Here are some tips on how to keep the Heel from moving in those functional yet stylish boots.

Heel slippage and movement are inevitable and often due to your shoe not fitting your footwell. You can, however, take preventative steps along with using tricks to ensure your boots grip your feet. Here is How to keep Heel from moving in pull on boots.

How To keep Heel From Moving In Pull On Boots

What is Heel Slipping On Work Boots?

Heel slipping is an uncomfortable but common problem that affects many. If your shoes are too loose or tight, they’ll probably slip, but it’s less familiar with heeled shoes. Heel going to fall refers to the unpleasant sensation of your feet slipping from your shoes.

Furthermore, in certain instances, it completely pops out, having left your shoes behind. After a few days of wearing people, the slip fades. If the slipping continues, it really should be considered a problem, and steps should be taken to address it. Heel slipping occurs for two reasons:

  • Shoes that flex too much
  • Shoes that are too soft

Heel slipping is a problem that makes you feel uncomfortable all day long. Although some shoes have been designed to keep our foot steady, it is not enough to protect them from sliding from the back.

These shoes entirely rely on the straps and the tightening systems to keep them in place, and they often fail in doing so. So, high-heeled women stay away from open-backed shoes and try to wear shoes that have a closed-back structure. Heel slipping controls by using lace-up or pull-on boots. For these, read out pull on work boots vs lace-up articles.

What Causes Heel Slippage?

Suppose you’re experiencing heel slippage after you’ve broken in your boots. In that case, we recommend trying the following: This may not be a permanent solution to your heel slippage and will vary depending on who is wearing the boot. But the simple adjustment of the boot’s tongue will often provide more room for the Heel of your foot. New boots are typically stiff and have a tendency to be uncomfortable at first.

The heel slippage you experience is directly related to the stiffness of the shoe. Heel slippage should lessen as your footwear becomes more flexible. Don’t worry! We’re running down common causes of heel slippage and offer some tips for fixing the problem.

Sizing Issue

The best way to know if the shoe will fit appropriately without suffering foot pain is to actually try it on before purchase. One of the biggest mistakes people make when buying work boots is that they don’t know their proper boot sizing. A boot that’s too small will cause discomfort (and your feet to get cold), while boots that are too big can make it hard to land tricks.

It is essential to locate a shoe that fits. However, this is difficult if the shoe is not made in wide sizes or in many widths. Often high-end brands will offer a narrow size for people with a narrow foot, medium for general widths, and extra-wide for those with a wider foot.

keep Heel From Moving In work boots

Heel Lift

Shoe heel slippage, commonly known as heel lift, is caused by loosening the shoelaces. Men slip on work boots due to heel lifting of loose boots.


Outsoles make a difference; it’s one reason we prefer hiking boots. Light hikers and trail runners with only a small lug under the whole foot can slip off rocks, cracks, and roots. Make sure your outsole has precise edges and an aggressive tread pattern.

Take Some Preventive Measures

How to keep Heel from moving in pull on boots? Boots and shoes can be pretty expensive, and you want to make sure that the pair you buy fits your feet. But, for your footwear to be comfortable, it needs to fit properly. A pair of boots that don’t fit properly could end up giving you heel slippage! Below, we’ll talk about how you can avoid it.

Many people experience heel slippage with new boots, but the condition will also occur in older or more worn shoes. While there are many potential causes for this issue, it is more common in footwear that only stands up to light use rather than being worn daily. Take some precautionary measures to prevent concrete slip on work boots.

Arch Support And Proper Cushion Grip

While looking for the perfect boots, don’t forget to look at the tread. Make sure you get a pair with good tread so they won’t slip and your feet don’t slide around inside them. You can also try inserting some footpads or some extra soles into the bottom of the shoe. This will help give you more grips on the boot as well as more arch support.

Add some cushion inside your boots after you’ve already broken them in, and you will prevent heel slippage. If you apply this, you can wear your boots for longer hours without experiencing heel pain. And that’s the real benefit!

Invest Good Money For The New Boot

When you invest in a good pair of work boots, the last thing you want to think about is slipping and sliding as you try to grip a steep trail. Even the most experienced hikers can slip up from time to time on the wet or snowy ground. With a perfect pair of insoles, you’ll have the confidence you need to tackle those trials with confidence.

Keep Boot Clean

Cleaning your boots would be ideal, but there are some other methods to try to prevent heel slippage in your boots. One is to make sure you don’t buy boots that are too big. If you keep having problems with this, purchasing some boot stretchers or insoles may be in order. You could also use some boot grips on the soles of the boots to help you keep your footing.

Insole Into The Boot

One of the easiest ways to reduce heel slippage in your hiking boots is simply sliding an insole into the boot. There are various picks on the market today, but not all are created equally. An insole can help keep your boot tops snug and secure.

The most essential point to consider is what material the insoles are made of. More than 90% of plantar fasciitis innersoles are made of EVA (ethylene vinyl acetate). It’s cheap, durable, and flexible, helping reduce shock when walking.

Remain Patient

Since it is difficult to cure the foot slip in a pair of shoes at once, it is also hard to prevent heel slip. If you want to avoid the fact that the foot slips out in a pair of shoes for a long time, you can rely on this method.

The new-style bootie remains patient with feet that are always prone to slipping. Especially, it is in the areas of the Heel, toes, and corners of the foot. Heel slippage is one of the most annoying shoe problems encountered by people with diabetes. The new bootie features an open-toe box to minimize the bunching of stiff stockinette or foam around the foot for sleek entry.

Buy Non-Slip Socks

non slip socks

If you are always wearing shoes without socks, you need to change them immediately if you are one of those people. Today’s market is full of non-slip socks that can secure feet. Never ever take a chance with bare feet in a pair of loafers or even in a pair of work boots. Invest always in a good pair of non-slip socks that can provide you with warmth and prevent slippage.

Non-slip socks stop the slipping and shifting of the feet inside the shoe. If you have a habit of walking barefoot in your home, especially when using a wet floor, get non-slippery socks to prevent accidents. Alo you can buy slip-on boots approved by OSHA for more comfort.

Use Double-Sided Tape

You must know that double-sided tape is suitable for preventing your foot from slipping in your heels when you have chosen the wrong pair. Keep double-sided tape handy. If you do not plan to use this step, keep rolls of double-sided tape within reach.

Additionally, it is a quick fix when you want to attend occasions. Paste each half of the double-sided tape on both your socks and sneakers to prevent sliding.

Final Words

In short, How to keep Heel from moving in pull on boots?  There are two reasons why this happens; one is that the problem is caused by the improper fit of the boot. The other reason can be because you need to clean your boots well, especially the inside lining.

The causes of heel slippage depend on several different factors. The main factors that can cause your boots to be too loose or too tight include the laces’ looseness or tightness, the tongue’s looseness or tightness, and the condition of your socks. Cycling socks are usually tighter than hiking socks, so you may have to experiment with both types of socks to see which ones best fit your boots.

Leave a Comment